Nikon SC-17 TTL Flash Sync Cord
What an expensive coiled cord at $52 a pop!. But, admittedly, it is useful. Many
people complained that the plastic connection and the connection are fragile. So far
so good for me.
The connector in the front in the picture slides into the flash hot-shoe on
the camera. The connector that is attached to the flash unit in the picture can be used
to connect to two more flash units, via SC-18 or SC-19 cords using the 3-pin socket
(same as the TTL socket on the flash unit) at the sides of the connector. The bottom
of the connector has a standard-sized tripod socket. The cord can be extended to
approximately 1 meter. 1.5 is possible with some stretching.
Back to my Photo Gear page
Last updated: August 15, 1997.