Digitizing cassettes
The cassette deck about the G3 can be used to digitize tapes.

To use it, you should:
- Turn on the cassette deck, and put your tape in
- On the USBPre box, select "tape" as the input (left for mono, both for stereo)
- Press "play" on the tape, and let it go a short while to check that the levels are set correctly on the USBPre. Then go back to cue up the position on the tape where you want to start digitizing.
- The sound capture is done with the iMac G3, using the same procedure as for recording in the booth.
- Launch Amadeus
- Select "Record to new file"
- Set your file settings
- Record the sound and make sure it's saved